Cobalt Blue Pebble Tiles for Shower Floor Bathroom Floor Wall Mosaic Tile [Set of 5 Sheets]

Glazed Cobalt Blue Pebble Mosaic Tile Sheets for Shower Walls and Floors

Exciting Aesthetic Touch to Your Space

Elephantile Porcelain Pebble Mosaic Tiles are good choice for your bathroom walls, floors, backsplashes and pool. Cobalt blue color adding a natural touch to your home space, creating an elegant and tranquil atmosphere. Meticulously crafted with natural pebbles, each tile showcases a unique mosaic design that adds visual intrigue. In the bathroom, the pebble mosaic tile enhances walls, floors, and backsplashes, infusing your space with a touch of sophistication. With its water-resistant and durable construction, this cobalt blue porcelain mosaic tile is perfect for wet environments and is easy to maintain.

Excellent Features of Pebble Mosaic Tiles

Widely Used for Interior and Exterior

Elephantile porcelain pebble mosaic tiles, have more advantages than the traditional stone pebble tiles, which is thinner, lighter, but stronger. Porcelain pebble mosaic tiles can be used in both wet and dry environments, and is easy to maintain. Pebble mosaic tiles are not only great on floors and walls but also have been most popular in bathrooms, spas, kitchen backsplash, wall facades and pools as well as a variety of other applications. Glazed porcelain pebble mosaic tiles are designed to enhance the architecture of your space.

Pebble Mosaic Tile Step-by-Step Installation

Preparation:

Ensure that the surface you're tiling is clean, dry, and smooth. If you're tiling over an existing surface, make sure it's well-adhered and free from loose debris.

If tiling a wet area like a bathroom or kitchen backsplash, consider using a waterproof backer board or membrane to prevent water damage.

Installation Steps:

1. Measure Wall Dimensions: Measure and mark the centerline of the area to be tiled. This will help you ensure that your tiles are evenly distributed.

2. Layout Tiles to Fit: If needed, cut tiles to fit along the edges using a tile cutter or tile nipper. Wear safety glasses when cutting tiles.

3. Application of Adhesive: Mix the thin-set mortar according to the manufacturer's instructions. It should have a peanut butter-like consistency.

Use a notched trowel to spread a layer of mortar on a small section of the surface. Work in small sections to prevent the mortar from drying out before you can apply the tiles. Hold the trowel at a 45-degree angle and comb the mortar to create ridges. This helps the tiles adhere properly.

4. Setting Tiles: Press the glass mosaic tiles into the mortar, following your layout and using tile spacers to maintain even gaps between the tiles. Press gently but firmly to ensure good adhesion. Allow the tiles to set in the mortar for the time specified by the manufacturer (usually 24 hours).

5. Grouting: Mix the grout according to the manufacturer's instructions. Use a grout float to press the grout into the gaps between the tiles. Hold the float at a 45-degree angle and work diagonally across the tiles to avoid pulling out the grout.

6. Clean The Wall: Wait for the grout to set for a short period (about 15-30 minutes), then use a damp sponge to wipe away the excess grout from the tile surface. Rinse the sponge frequently and avoid using too much water, as it can weaken the grout. After the grout has dried for about 24 hours, use a clean, dry cloth to buff any remaining grout haze from the tiles.

Remember, the exact process might vary based on the specific products you're using and the conditions of your space. Always refer to the manufacturer's instructions for the best results. If you're new to tiling, consider practicing on a small area or seeking advice from professionals to ensure a successful installation.